Perun Airsoft P-90 Mosfet

Perun Airsoft P-90 Mosfet

Perun for P90 replaces gearbox bar and mechanical contacts in your P-90 replica and provides lots of useful features. Magnetic sensors coupled with a magnet installed directly on the pull, allow the removal the bar that connects the pull with the gearbox, making it much smoother. Proprietary cut-off lever (comes with the mosfet) works with an optical sensor to eliminate all problems with gearbox function. 

Replicas compatible with this mosfet are models made by: Tokyo Marui, ACM, Asia Tactical, Classic Army, Cybergun, CYMA, J Tactical, JG.

It is incompatible with G&G and Krytac P90’s.

Feature description

Adjustable sensitivity – The sensitivity has 5 levels for both first and second stage, ranging from short pull needed to a long one. No modification to the mechanism or the gearbox is needed. 

Active brake - active brake stops the motor after each shot preventing spring compression or in case of replicas with high rate of fire, overspin (double shot problem).

Precocking - Fast response can be a matter of victory or defeat, especially in CQB situations. With precocking enabled, piston will remain in rear position after each shot with the spring already compressed, ensuring that next shot will be fired immediately after you activate the gearbox. To release the spring after using precocking, pull the lever and hold it for 2 seconds, after which a second shot will be fired, this time with no precocking and fully braked.

ROF reduction - Reduce the ROF in all modes to save ammo or slow down the gearbox. 

Low battery voltage alarm - Dedicated for Li-Po and Li-Ion batteries. Should the battery voltage fall to a dangerously low level, user will be notified by short sound signals that are repeated every minute. This may also be freely switched on and off.

DSG – a sector gear detection mode specially prepared to work with dual sector gears.

Diagnostic system - Constantly monitors the replica and the mosfet itself. In case of any problems, immediately lets you know what it might be, making troubleshooting much easier.

Electronic fuse - Will save your replica and battery in case of a major malfunction. It will automatically disconnect the battery when a short circuit or blocked motor is detected.

Programming of all the settings is done solely by using a button and multicolour LED diode mounted in the battery compartment and the trigger. That allows changing the settings in any moment, in a matter of seconds, even under enemy fire. All settings are set independently for each selector position, so you can program the mosfet exactly the way you want, for example semi on semi and binary trigger on auto.

Perun for P90 works without problems with any battery from, 7 V to 17 V. It can also be used with most extreme setups.

Same Day Dispatch On All Orders Placed Before 3pm Monday – Friday

Bullseye Country Sport