Airsoft Pro CNC Suppressor (Silencer) VIPER™ 180 x 40mm with Barrel Extension

AirsoftPro CNC Suppressor (Silencer) VIPER™ 180 x 40mm with Barrel Extension

Full metal CNC VIPER™ suppressor with Barrel Extension for airsoft guns.

The suppressor is mostly used on airsoft guns as an aesthetic accessory, but it can also be filled with baffles to reduce the noise when firing.

The VIPER suppressor can be mounted classically in the rear cap of the suppressor (14 mm left-hand thread) on the adapter or the end of the rifle barrel. The rear cap also has two holes for easier tightening, e.g. with pliers.

The suppressor in this variant can be filled with silencing baffles (40 mm diameter) to reduce noise or with AirsoftPro A.E.I. centring insert to guide the inner barrel.

However, screwing on the end of the barrel will lengthen the often already long gun. Therefore, you can use another mounting method that will improve the appearance of the gun and not increase its length.

In the package you will find two additional rear suppressor caps, each with a different internal hole (20 / 31 mm) with tightening rubber O-rings. Depending on the width of the outer barrel of your rifle, you replace the rear cap on the suppressor and fit the entire suppressor over the barrel of the rifle.

The suppressor screws to the barrel or adapter at the point of the front cap, which has a 14 mm left-hand thread on the inside. The rear cap of the suppressor then holds the suppressor axially to the barrel using tight O-rings.

The AirsoftPro External Barrel Extension 11.8 cm, which is included in the package, can also be used in this way. Screw the extension onto the front cap and increase the space for the inner barrel by the length of the extension.

PRECISION WORKMANSHIP

The VIPER suppressor is manufactured by precision CNC machining from durable 6061T6 aluminium alloy. Thanks to this, everything fits precisely, the suppressor is lightweight (only 165 g), and at the same time very durable.

HIGH QUALITY FINISH

The finish of the VIPER suppressor is also worth mentioning. The suppressor is sandblasted during production and then chemically blackened. This gives the shock absorber its characteristic matt appearance and makes the surface significantly more scratch resistant.

CONTENTS OF THE PACKAGE

CNC VIPER™ suppressor 180 x 40 mm

Front cap with 14 mm left-hand thread

Rear cap with 14 mm left-hand thread

Rear cap with 20 mm internal hole

Rear cap with 31 mm internal hole

Outer barrel extension 11.8 cm

O-rings 3 pcs

Same Day Dispatch on All Orders Placed Before 3pm Monday – Friday

For Airsoft Use Only, cannot be Modified for any other Purpose

Bullseye Country Sport

Your No 1 Outdoor Hobby Store

Footwear, Field Sports, Camping Equipment and more

Always On Target